Grinding Examples | ATRYZ INAKEN CO.,LTD.

TOP > Grinding Examples

- Insert the grinding stones into the honing head.
- The internal radius of the workpiece is ground by a reciprocating rotational motion of the honing head.
- Grind the inside diameter of the workpieces
  with expanding the grinding stones.
- This process improves Roundness, Cylindricity, and Roughness,
  and also produces a Cross-hatching pattern.
Examples of workpieces
Engine cylinders, Connecting rods, Gears, Hydraulic Components, etc.

To the product information >>

To the improvements 1 >>

To the improvements 2 >>
- Slightly expand the exclusive tools that grinding stones
  are glued to.
- Grind the inside diameter of the workpieces by making
  the rotating tool reciprocate only one time.
- This process improves Roundness, Cylindricity, and Roughness.
Examples of workpieces
Gears, Connecting rods, etc.

To the product information >>
- Grind the inside diameter of the workpieces by reciprocating and
  rotating the grinding stones, and rotating the workpieces.
- Grind the inside diameter of the workpieces by feeding
  the grinding stones into the workpieces.
- This process improves Roundness, Cylindricity, and Roughness.
Examples of workpieces
Auto parts, Compressors, Gears,
Carbide parts, Die parts, Optical parts, etc.

To the product information >>
- Grind the outside diameter of the workpieces by oscillating
  the grinding stones or the workpieces, and rotating them.
- Grind the outside diameter of the workpieces by feeding
  the grinding wheels into workpieces.
- This process improves Roundness, Cylindricity, and Roughness.
Examples of workpieces
Camshafts, Crankshafts, etc.

To the product information >>
- Grind the outside diameter of the workpieces
  by rotating grinding stones and workpieces.
- The grinding stones have the same shape as workpieces.
- This process improves Sphericalness, Roughness,
  and also produces a Cross-hatching pattern.
Examples of workpieces
Hydraulic pistons, Artificial joints, etc.

To the product information >>
- Grind the surface of the workpieces by fixing them
  on the rotating table, and rotating the grinding stones.
- Grinding several workpieces at the same time is possible.
- This process improves Flatness and Roughness.
Examples of workpieces
End face of cylinder blocks, Carbide cutters, Quartz, etc.

To the product information >>
- Grind the end face of the workpieces by rotating
  the grinding stones and the workpieces.
- Grind the end face of the workpieces by applying pressure
  to the grinding stones.
- This process improves Flatness and Roughness.
Examples of workpieces
Valve lifters, End face of gears, etc.

To the product information >>
- Grind with the two rotating grinding stones that are parallel
  to the workpieces.
- Grind both sides of the workpieces at the same time.
- This process improves Flatness and Roughness.
Examples of workpieces
Disk brakes, Connecting rods, Piston rings, Compressor parts, etc.

To the product information >>